The fast soluble organic chlorine-containing granulated agent is used for rapid water treatment during the season in the case of extreme conditions of the pool operation (high temperatures, pool load, stormy weather) and in the case of water with a non-standard quality (turbidity, bad smell). If the agent is used, the required chlorine concentration is achieved quickly, which will help the water quality parameters to return to the required values and will create the conditions for later application of agents used for long-term water quality maintenance.
If compared with CHLORSHOCK GRANULAR, the decrease in the chlorine content is slower due to a gradual creation of stabilising substances.
Before the product is used, the water pH value should be altered to a value from 6.8 to 7.6 using pH MINUS or pH PLUS. In the case of hard water, its hardness may be stabilised with WATER HARDNESS STABILIZER, all this according to the instructions for use printed on the product packaging.
CHLORINE GRANULAR in the amount of 40-80 g/10 m3 is slowly poured into the levelling tank. The measured amount of the product may also be dissolved in a plastic bucket and the created solution may then be slowly poured into the levelling tank or directly into the pool. The water contained in the pool must be mixed properly and if the active chlorine concentration found with a tester is lower than 0.3 mg/l, add more of the product. After the water in the pool is treated with CHLORINE GRANULAR, CHLORINE TABS or COMBI TABS are used for long-term treatment of the pool water according to the instructions for use printed on the product packaging.”